From: Dennis Yarak (firstname.lastname@example.org)
Date: Tue Jan 02 2001 - 17:26:22 PST
on 1/2/01 9:36 PM, Mike LaBonte at email@example.com wrote:
> Your stackups have 5 and 4 signal layers, respectively. When you say
> you are using the same Gerber files, doesn't that mean the layer routes
> are the same, with only the via padstacks changing? How is the "extra"
> signal layer used?
> Mike LaBonte
> Dennis Yarak wrote:
>> I haven't been following threads recently (too busy) but I do have a mildly
>> interesting result to report in re: split planes.
>> After discussions with our EMI experts we decided to do two different stack
>> ups with the same gerber files. This is a 10 layer/50 ohm board with
>> s-g-s-s-g-pslit-psplit-s-g-s, and the alternative was
Yes sorry about the typo, that's s-g-s-psplit-g-psplit-s-s-g-s, perhaps I
should have said "take layer 4 and swap it with layer 7."
firstname.lastname@example.org. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:32 PDT