RE: [SI-LIST] : W-element in HSPICE

About this list Date view Thread view Subject view Author view

From: Ron Miller (rmiller@Brocade.COM)
Date: Tue Dec 19 2000 - 08:53:53 PST


Try HP ADS with Impulse for top of the line. It uses highly
accurate frequency domain models, developes complete
s-parameters and then convolutes the impulse response
of the network against the time domain signal.

Nothing better on the planet.

Ron Miller

> -----Original Message-----
> From: Alex March
> Sent: Tuesday, December 19, 2000 2:14 AM
> To: si-list@silab.eng.sun.com
> Subject: [SI-LIST] : W-element in HSPICE
>
> Hello,
>
> I have seen a lot of discussions lately on the list
> and also in the SI-LIST archives about the HSPICE
> W-element accuracy or lack of accuracy.
> Therefore I would like to ask for your opinions
> about equivalent transmission line from other
> simulation tools. So in other tools are there more
> accurate models for coupled lossy lines, with
> frequency dependant losses, maybe checked against
> measured data?
>
> Thank you,
>
> Alex
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Shopping - Thousands of Stores. Millions of Products.
> http://shopping.yahoo.com/
>
> **** To unsubscribe from si-list or si-list-digest: send e-mail to
> majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
> si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
> ****
>

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:28 PDT