From: Wai-Ming Hung (email@example.com)
Date: Tue Dec 05 2000 - 20:05:44 PST
Despite the fact that I can use resistor to reduce output noise,
are there other novel ways such that I need not compensate the
output level while still can reduce noice, Or can I do sth in the
pre-drive stage before the output stage ?
**** To unsubscribe from si-list or si-list-digest: send e-mail to
firstname.lastname@example.org. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:21 PDT