[SI-LIST] : Verifying IBIS models

About this list Date view Thread view Subject view Author view

From: Brad Crowell (crowell@amirix.com)
Date: Fri Dec 01 2000 - 07:45:40 PST


I am wondering how the verification of an IBIS model is being handled. The
accuracy spec provides the "golden waveforms" that a simulation output can
be checked against, but how is this checking being done by most people? Is
this just a visual check or are there some tools out there that can provide
a quantitative measure of the model's accuracy? Is this feature included in
some of the simulation tools?

Thanks for your comments,
Brad
***************************************
Brad Crowell
Hardware Designer
AMIRIX Systems
77 Chain Lake Drive
Halifax, Nova Scotia, B3S 1E1
Tel: (902) 450-1700 ext#287
Fax: (902) 450-1704
Email: crowell@amirix.com
Web: http://www.amirix.com
***************************************

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:19 PDT