From: Michael Nudelman ([email protected])
Date: Tue Nov 28 2000 - 07:41:39 PST
Any well-decoupled power plane is good enough. We use it without
noticeable problems.
Mike.
Alex March wrote:
> Hello everybody,
>
> I would like to ask your opinion about the
> following problem: I have a board with some high speed
> SerDes at 2.125 Gbps (differential). Since there are
> many lines like this, I would like to route some of
> them between power planes (2.5V and 3.3V) or between a
> GND and a power plane. This would save me some layers.
> Now I saw some application notes which recomend to
> use only GND planes as reference for these lines, so I
> don't know which is the best solution.
>
> Many thanks,
>
> Alex
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Shopping - Thousands of Stores. Millions of Products.
> http://shopping.yahoo.com/
>
> **** To unsubscribe from si-list or si-list-digest: send e-mail to
> [email protected]. In the BODY of message put: UNSUBSCRIBE
> si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
> ****
**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****
This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:16 PDT