From: Scott McMorrow ([email protected])
Date: Mon Nov 20 2000 - 12:39:30 PST
Mike,
Add to this list:
Package coupling (often huge)
FET switching substrate coupling (interesting effect)
regards,
scott
-- Scott McMorrow Principal Engineer SiQual, Signal Quality Engineering 18735 SW Boones Ferry Road Tualatin, OR 97062-3090 (503) 885-1231 http://www.siqual.comMike Mayer wrote:
> [PCI problems simulation vs. real board] > > PCI is meant to be unterminated and so there can be overshoot and > ringing. That said, I can think of several things that can cause > differences between simulated and measured results: > > - models (of course) > - only looking at typ simulation data (real board may be closer to > min or max) > - limited bandwidth of scope used to measure board or poor > connection to board. > > --
**** To unsubscribe from si-list or si-list-digest: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu ****
This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:11 PDT