From: Mike Mayer ([email protected])
Date: Mon Nov 20 2000 - 12:19:54 PST
[PCI problems simulation vs. real board]
PCI is meant to be unterminated and so there can be overshoot and
ringing. That said, I can think of several things that can cause
differences between simulated and measured results:
- models (of course)
- only looking at typ simulation data (real board may be closer to
min or max)
- limited bandwidth of scope used to measure board or poor
connection to board.
-- ============================================================================= Mike Mayer [email protected]**** To unsubscribe from si-list or si-list-digest: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu ****
This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:11 PDT