RE: [SI-LIST] : Ferrite Beads

About this list Date view Thread view Subject view Author view

From: Ken Cantrell (Ken.Cantrell@srccomp.com)
Date: Thu Nov 16 2000 - 14:35:02 PST


Dipreet,
Are you describing a situation where you are "bridging" two grounds, like
digital and analog, or a split plane, and if/why that would cause ground
bounce?
Ken

-----Original Message-----
From: owner-si-list@silab.eng.sun.com
[mailto:owner-si-list@silab.eng.sun.com]On Behalf Of Dilpreet Saini
Sent: Thursday, November 16, 2000 10:26 AM
To: 'marcgodbout@auranetinc.com'
Cc: si-list@silab.eng.sun.com
Subject: RE: [SI-LIST] : Ferrite Beads

Hi Marc,
        Can you please comment a little bit more on Why would a ferrite in series
with GND cause the ground bounce.

regards,
Dilpreet

-----Original Message-----
From: marcgodbout@auranetinc.com [mailto:marcgodbout@auranetinc.com]
Sent: Thursday, November 16, 2000 4:41 AM
To: Dilpreet Saini; si-list@silab.eng.sun.com
Subject: RE: [SI-LIST] : Ferrite Beads

>From experience, a ferrite in series with GND will cause a ground bounce on
the board. If you're using DC coupled signals to other circuits in the
system, these signals will see their reference point change.

-Marc Godbout

> -----Original Message-----
> From: Dilpreet Saini [mailto:DSAINI@altera.com]
> Sent: Wednesday, November 15, 2000 4:45 PM
> To: SI List (E-mail)
> Subject: [SI-LIST] : Ferrite Beads
>
>
> Hi all,
> In the past I have used ferrite beads for transient and
> parasitic suppression of the supply (VCC) coming into the
> board. So far I have never used ferrite beads in series with
> the GND trace/plane. I was wondering do any of you have any
> experience using ferrite beads in that scenario.
> Thanks in advance for your help.
>
> regards,
> Dilpreet

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:09 PDT