Re: [SI-LIST] : Connector pin pwr/gnd ratio

About this list Date view Thread view Subject view Author view

From: Charles Grasso ([email protected])
Date: Mon Nov 13 2000 - 13:25:22 PST


The allocation of grounds with respect to any number of signals is mainly
based
on rise time (hence frequency content). That is to say the faster the rise
time the
more grounds you need - the asymptote being a solid "bar" connection found
in many impedace controlled connectors.

----- Original Message -----
From: "Peterson, James F (FL51)" <[email protected]>
To: <[email protected]>
Sent: Monday, November 13, 2000 6:57 AM
Subject: [SI-LIST] : Connector pin pwr/gnd ratio

> Hello,
>
> I'm looking for some information on what the pwr/gnd ratio should be for a
> board's connector. (I know there is something in the archives, but I
> couldn't find it.)
>
> Someone said a rule of thumb is a 3 to 1 ratio, but I'm not sure what that
> is based on.
>
> So let's say for example I have 85 connector pins for 3.3v, 2.5v and gnd.
> How would you distribute? and why?
>
> thanks
> Jim
> > Jim Peterson
> > [email protected]
> > Honeywell Space Systems
> > M/S 934-5
> > 13350 U.S. Hwy 19 N.
> > Clearwater FL, 33764-7290
> > Office : 727-539-2719
> > Fax : 727-539-2183
>
> **** To unsubscribe from si-list or si-list-digest: send e-mail to
> [email protected]. In the BODY of message put: UNSUBSCRIBE
> si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
> ****
>
>

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:06 PDT