[SI-LIST] : Question about ferrite beads

From: Golian, Alexander ([email protected])
Date: Mon Nov 13 2000 - 08:02:18 PST

• Next message: Dan Swanson: "RE: [SI-LIST] : HFSS Question"
• Previous message: Michael Nudelman: "Re: [SI-LIST] : deCoupling caps and there placement"
• Next in thread: Ray Anderson: "Re: [SI-LIST] : Question about ferrite beads"
• Maybe reply: Ray Anderson: "Re: [SI-LIST] : Question about ferrite beads"
• Reply: Bob Lewandowski: "Re: [SI-LIST] : Question about ferrite beads"

Greetings,

On an evaluation board I am using, at the bottom of the page, it calls for
Ferrite Beads, 600MHz, 0.5ohms. The vendor chose a particular inductor.
The specs for this inductor, BLM11A601SPT, from Murata, does have a DC
resistance rating of 0.5 ohms, but it self resonates at ~150MHz. What would
the 600MHz mean, that the DC resistance is 0.5 at 600MHz?

Alex

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

• Next message: Dan Swanson: "RE: [SI-LIST] : HFSS Question"
• Previous message: Michael Nudelman: "Re: [SI-LIST] : deCoupling caps and there placement"
• Next in thread: Ray Anderson: "Re: [SI-LIST] : Question about ferrite beads"
• Maybe reply: Ray Anderson: "Re: [SI-LIST] : Question about ferrite beads"
• Reply: Bob Lewandowski: "Re: [SI-LIST] : Question about ferrite beads"

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:05 PDT