From: Zabinski, Patrick J. (firstname.lastname@example.org)
Date: Thu Nov 09 2000 - 18:56:15 PST
A common example in our shop is when we have two voltage
levels and ground. We will sometimes split the power plane
per the two voltage levels, and we'll put the continuous
ground directly below.
> Just a quick question...
> If you have the extra plane available, why would you choose
> to put a split
> plane directly under your signal layer?
> Jeff Loyer
> (253) 371-8093
**** To unsubscribe from si-list or si-list-digest: send e-mail to
email@example.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:02 PDT