[SI-LIST] : Inductor Selection

From: Golian, Alexander ([email protected])
Date: Tue Nov 07 2000 - 06:50:38 PST

• Next message: Golian, Alexander: "[SI-LIST] : Inductors"
• Previous message: Michael Nudelman: "Re: [SI-LIST] : Connecting board grounds to chassis"
• Next in thread: Ray Anderson: "Re: [SI-LIST] : Inductor Selection"
• Maybe reply: Ray Anderson: "Re: [SI-LIST] : Inductor Selection"
• Maybe reply: [email protected]: "Re: [SI-LIST] : Inductor Selection"
• Maybe reply: Ingraham, Andrew: "RE: [SI-LIST] : Inductor Selection"

I have a question about inductor selection. I am designing a filter circuit
to filter out noise from a power supply input to a PLL circuit. I want to
filter out noise up to 1MHz. What should be the self resonance of such an
inductor. The Q can be low, the application is broad band. Any help would
be greatly appreciated.

Thanks,

Alex

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

• Next message: Golian, Alexander: "[SI-LIST] : Inductors"
• Previous message: Michael Nudelman: "Re: [SI-LIST] : Connecting board grounds to chassis"
• Next in thread: Ray Anderson: "Re: [SI-LIST] : Inductor Selection"
• Maybe reply: Ray Anderson: "Re: [SI-LIST] : Inductor Selection"
• Maybe reply: [email protected]: "Re: [SI-LIST] : Inductor Selection"
• Maybe reply: Ingraham, Andrew: "RE: [SI-LIST] : Inductor Selection"

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:00 PDT