[SI-LIST] : Equivalent Conductivity of Inner Copper layer in PCB?

From: Jason Xiao ([email protected])
Date: Tue Oct 31 2000 - 13:27:31 PST

• Next message: Golian, Alexander: "[SI-LIST] : High Speed AC Coupling"
• Previous message: Brad Underwood: "Re: [SI-LIST] : Parallel single-ended traces routed to achieve 35Ohm controlledimpedance"
• Next in thread: [email protected]: "Re: [SI-LIST] : Equivalent Conductivity of Inner Copper layer in PCB?"
• Maybe reply: [email protected]: "Re: [SI-LIST] : Equivalent Conductivity of Inner Copper layer in PCB?"

Hi,

What's equivalent conductivity of inner copper layer (1/2 oz or 1 oz copper)
due to surface roughness and material impurity?
Can I still use 5.8e7 for that?

Sorry to use your topic to reply since I am really new here (have not
figured out
how to post it yet).

Jason

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

• Next message: Golian, Alexander: "[SI-LIST] : High Speed AC Coupling"
• Previous message: Brad Underwood: "Re: [SI-LIST] : Parallel single-ended traces routed to achieve 35Ohm controlledimpedance"
• Next in thread: [email protected]: "Re: [SI-LIST] : Equivalent Conductivity of Inner Copper layer in PCB?"
• Maybe reply: [email protected]: "Re: [SI-LIST] : Equivalent Conductivity of Inner Copper layer in PCB?"

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:55 PDT