Re: [SI-LIST] : coaxial buffer for a pattern generator?

About this list Date view Thread view Subject view Author view

From: Michael Nudelman (mnudelman@tellium.com)
Date: Tue Oct 17 2000 - 08:50:38 PDT


Try S2091 by AMCC

Mike.

Todd Derego wrote:

> Does anyone know a source for a buffer that I can attach to the
> coaxial outputs of a pattern generator? It needs to buffer at least a
> 2.5Gbps signal if not more. I tried to search the Agilent site but I didn't
> have much luck. Thanks!
> Todd
>
> Todd DeRego
> Senior Signal Integrity Engineer
> Lucent Technologies INS
> 200 Nickerson Road
> Marlborough MA 01752
> (508) 786-2168
> tderego@lucent.com
>
> **** To unsubscribe from si-list or si-list-digest: send e-mail to
> majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
> si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
> ****

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:47 PDT