[SI-LIST] : coaxial buffer for a pattern generator?

From: Todd Derego (TDerego@nexabit.com)
Date: Tue Oct 17 2000 - 08:13:13 PDT

• Next message: Michael Nudelman: "Re: [SI-LIST] : coaxial buffer for a pattern generator?"
• Previous message: Bill Cohen: "Re: [SI-LIST] : AC analysis for OTA"
• Next in thread: Michael Nudelman: "Re: [SI-LIST] : coaxial buffer for a pattern generator?"
• Reply: Michael Nudelman: "Re: [SI-LIST] : coaxial buffer for a pattern generator?"

        Does anyone know a source for a buffer that I can attach to the
coaxial outputs of a pattern generator? It needs to buffer at least a
2.5Gbps signal if not more. I tried to search the Agilent site but I didn't
have much luck. Thanks!
        Todd

Todd DeRego
Senior Signal Integrity Engineer
Lucent Technologies INS
200 Nickerson Road
Marlborough MA 01752
(508) 786-2168
tderego@lucent.com

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

• Next message: Michael Nudelman: "Re: [SI-LIST] : coaxial buffer for a pattern generator?"
• Previous message: Bill Cohen: "Re: [SI-LIST] : AC analysis for OTA"
• Next in thread: Michael Nudelman: "Re: [SI-LIST] : coaxial buffer for a pattern generator?"
• Reply: Michael Nudelman: "Re: [SI-LIST] : coaxial buffer for a pattern generator?"

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:47 PDT