From: Greim, Michael ([email protected])
Date: Mon Oct 16 2000 - 06:04:35 PDT
I am not sure if you simply don't understand the term
or you want a more detailed explanation. I will assume
the former:
Edge coupled diff pair:
------- -------
conductor one conductor two
Broadside coupled diff pair:
------- conductor one
------- conductor two
An edge coupled diff pair are routed on the same layer
A broadside coupled diff pair are routed on adjacent layers.
As the term implies, the coupling occurs along the broad
side of the conductor.
best regards,
Michael Greim
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Sunday, October 15, 2000 11:28 PM
To: [email protected]; [email protected]
Cc: [email protected]
Subject: Re: [SI-LIST] : 2.5Gbps across a backplane?
Someone please explain broadside coupling to me.
Richard Ellison
**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****
**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****
This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:46 PDT