[SI-LIST] : IBIS T-Line Style Pin Parasitics Model

About this list Date view Thread view Subject view Author view

From: Robert J. Evans (rjevans@cisco.com)
Date: Fri Oct 13 2000 - 07:59:02 PDT


Can someone direct me to a tool which will extract pin parasitics from a package design, into the IBIS transmission line format? i.e. the following format:
AA11 Len=0 R=0.134 L=4.12n / | pad & bondwire
Len=3.5567 L=0.664n C=0.135p / | 1st section
Len=6.43 L=0.674n C=0.135p / | 2nd section
Len=0.37 L=0.134n C=0.140p / | 4th section
Len=0 C=2.2p /
AA09 Len=0 R=0.162 L=3.73n / | pad & bondwire
Len=2.4222 L=0.124n C=0.140p / | 1st section
Len=8.1958 L=0.324n C=0.150p / | 2nd section
Len=0.97 L=0.324n C=0.160p / | 4th section
Len=0 C=2.3p /

This is assuming that we have access to the package design file (.mcm, etc.)


Bob Evans

Bob Evans
Cisco Systems, RTP, NC
(919) 392-8430
e-mail: rjevans@cisco.com

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu

About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:45 PDT