[SI-LIST] : Far end crosstalk

About this list Date view Thread view Subject view Author view

From: JOHN SAWDY (JSAWDY@meritec.com)
Date: Wed Oct 11 2000 - 09:48:06 PDT


Greetings from Ohio.
What is the correct definition for far end crosstalk for a transmission line
(cable): is it the ratio of the voltage measured at the far end of a quiet
line vs. the input voltage on the active line or vs. the output (far end)
voltage on the active line, which is an attenuated version of the input
voltage.

FEXT = Vout quiet/Vin active or Vout quiet/Vout active?

John F. Sawdy, Senior Applications Engineer
Meritec, a division of Associated Enterprises
voice mail: 440-354-3148 x 267
fax: 440 -354-0687
mailto:jsawdy@meritec.com

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:42 PDT