Re: [SI-LIST] : No buried/embedded capacitance?

From: Dennis Yarak ([email protected])
Date: Fri Sep 22 2000 - 13:38:04 PDT

• Next message: Ray Anderson: "[SI-LIST] : Messages with non-viewable characters"
• Previous message: Greim, Michael: "RE: [SI-LIST] : No buried/embedded capacitance?"
• In reply to: John Kennedy: "[SI-LIST] : No buried/embedded capacitance?"
• Next in thread: Larry Smith: "Re: [SI-LIST] : No buried/embedded capacitance?"

John,

You can try 402 capacitors (assuming you can get any). They are
significantly less than half the board area of 508's and have similar ESL.
There is a nice X5R 0.1 uF from a couple of vendors....

> From: John Kennedy <[email protected]>
> Organization: Cambridge Parallel Processing
> Reply-To: John Kennedy <[email protected]>
> Date: Fri, 22 Sep 2000 10:59:54 -0700
> To: silist <[email protected]>
> Subject: [SI-LIST] : No buried/embedded capacitance?
>
> John
>
> PS. 321 ceramic caps is a lot of board space, any suggestions on ways to
> reduce the count?

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

• Next message: Ray Anderson: "[SI-LIST] : Messages with non-viewable characters"
• Previous message: Greim, Michael: "RE: [SI-LIST] : No buried/embedded capacitance?"
• In reply to: John Kennedy: "[SI-LIST] : No buried/embedded capacitance?"
• Next in thread: Larry Smith: "Re: [SI-LIST] : No buried/embedded capacitance?"

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:34 PDT