Re: [SI-LIST] : No buried/embedded capacitance?

About this list Date view Thread view Subject view Author view

From: Doug Brooks ([email protected])
Date: Fri Sep 22 2000 - 12:25:02 PDT


Don't overlook the fact that the relevant inductance is the
TOTAL inductance, including the spec'd ESL, the pads, vias, etc.

Doug Brooks

At 12:04 PM 9/22/00 -0700, you wrote:
>0508 caps with 1nh ESL????I am looking at the AVX specs and they list the
>ESL to be 0.6nh.
>I am pretty sure Murata specs them to be less than 1nh too...I would
>recommend checking the
>ESL spec. again...

.
************************************************************
Doug Brooks' book "Electrical Engineering for the Non-Degreed
Engineer" is now available. See our web site for details.
.
Doug Brooks, President [email protected]
UltraCAD Design, Inc. http://www.ultracad.com

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:34 PDT