From: Harris, George (George.Harris@compaq.com)
Date: Thu Aug 31 2000 - 11:50:10 PDT
And lets not forget why we are concerned about skin effect: because there is
too much attenuation in the signal path. Etch attenuates signals because of
copper loss as well as skin effect. Skin effect may be just part of it, so
doubling etch thickness (as from 0.5oz copper to 1oz) does help a lot.
This discussion is veering further and further from reality...
**** To unsubscribe from si-list or si-list-digest: send e-mail to
firstname.lastname@example.org. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:24 PDT