RE: [SI-LIST] : Schematic tools for generating HSPICE file

About this list Date view Thread view Subject view Author view

From: ARNOLD,PETER (HP-Cupertino,ex3) (peter_arnold@hp.com)
Date: Tue Aug 29 2000 - 14:16:25 PDT


SI-list,

There's a schematic-based spice called Simetrix from www.newburytech.co.uk
that you can get for less than $1k. I'm quite fond of it and use it for
first-cut topology explorations.

peter arnold.

-----Original Message-----
From: MikonCons@aol.com [mailto:MikonCons@aol.com]
Sent: Tuesday, August 29, 2000 1:20 PM
To: perry.qu@alcatel.com; si-list@silab.eng.sun.com
Subject: Re: [SI-LIST] : Schematic tools for generating HSPICE file

[cut]

> Although I haven't compared prices in the last year, the cost for the
various
> programs varies widely. I think Electronics workbench goes at $1k. MC6
is
> at $3.6k, and the others go from $5k to >$12k, depending on the tack-ons
you
> want. MC6 is an integrated, schematic/file entry, >12k model library,
> simulation/analysis, and plotting program; i.e., no tack-ons. Most of
these
> include free upgrades for a year and may only cost a pittance ($500 to
$1k)
> for a major upgrade (PSPICE may be more).
>
> Hope the above didn't bore or offend anyone,
>
> Mike
>
> Michael L. Conn
> Owner/Principal Consultant
> Mikon Consulting
> (408)727-5697

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:23 PDT