[SI-LIST] : Simulation of differential lines in XTK

About this list Date view Thread view Subject view Author view

From: selvaraj subramanian (selvaraj.manian@wipro.com)
Date: Thu Aug 24 2000 - 20:49:54 PDT


Hello,

If anybody there knows how to simulate a (LVDS) differential signalling in XTK, let me know.

I know how to connect differential drivers and differential receivers in XTK. But what I want to know is how can I write the topology file if that 100ohms resistor( a must for the LVDS signals near the receiver) is present in the topology.

thanks & regards,
Selva

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:20 PDT