Re: [SI-LIST] : best layer stackup for 2 PWR 4 Signal and 100 Oh

About this list Date view Thread view Subject view Author view

From: Matthias Mansfeld (m.mansfeld@mansfeld-elektronik.de)
Date: Sat Aug 05 2000 - 01:14:44 PDT


On 1 Aug 00 at 22:57, Matthias Mansfeld wrote:

> Hello all,
>
> I would like to read some opinions about a rather dense design
> (double side populated) with some high speed issues. Please
> apologize my beginner's questions, but this is my first design with
> controlled impedance differential pairs.
>
(snap)

Because I did not read any reactions on this mailing list until now
- was my question too dumb?
- was it off-topic or in any other way not appropiate?
- .....?

Just curious,
regards
Matthias Mansfeld
-----------------------------------------------
Matthias Mansfeld Elektronik
* Leiterplattenlayout, Bestueckung
Am Langhoelzl 11, 85540 Haar; Tel.: 089/4620 093-7, Fax: -8
Internet: http://www.mansfeld-elektronik.de

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Wed Nov 22 2000 - 10:50:58 PST