RE: [SI-LIST] : measuring Differential pairs

About this list Date view Thread view Subject view Author view

From: Smith, Norm W (NS121846@exchange.SanDiegoCA.NCR.COM)
Date: Thu Aug 03 2000 - 10:42:41 PDT


I would get an Agilent 54754A Differential TDR module and the manual will
tell you everything you need to know to make this measurement - even and odd
modes.

Norm Smith
NCR San Diego

        
        How does one go about measuring (using TDR) differential pairs on a
board.
        In other words, how does one measure the ZOD of the pair, be it
broadside or
        edge-edge?

        Regards,
        Sean Murray
        General Manager
         
        M&M Specialties Inc.
        1236 W. Southern Ave. #106
        Tempe, AZ. 85282-4518
        Phone: (480) 858-0393 x105
        Cell: (602) 684-7859
        Fax: (480) 858-1882
        Email: seandm@mmspec.com
        WWW.mmspec.com

        **** To unsubscribe from si-list or si-list-digest: send e-mail to
        majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
        si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
        si-list archives are accessible at http://www.qsl.net/wb6tpu
        ****

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Wed Nov 22 2000 - 10:50:57 PST