[SI-LIST] : A simple topology

About this list Date view Thread view Subject view Author view

From: [email protected]
Date: Mon Jul 31 2000 - 08:32:57 PDT


Sorry Folks. There's an error in my previous posting.
It's corrected below. Thanks Aubrey.

Let's take a net with one driver and two
identical receivers and analyze a simple topology.

Driver to T-point = L0
T-point to both receivers = L1
Total length from Driver to receiver L = L0 + L1

Case 1, L0 = 5.00", L1 = 1.00", L= 6.00"
Case 2, L0 = 1.00", L1 = 5.00", L= 6.00"

Question:

Is Case 1 ALWAYS better than Case 2 ? If not,
under what conditions? Variables can be types of
drivers and receivers, frequency, trace impedance,
stackup etc.

Kent Zhang
SMART Modular Technologies

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Wed Nov 22 2000 - 10:50:54 PST