Re: [SI-LIST] : Offset stripline

From: Doug McKean ([email protected])
Date: Fri Jun 23 2000 - 12:21:58 PDT

• Next message: Ingraham, Andrew: "RE: [SI-LIST] : Merits of low dielectric constant"
• Previous message: Doug Brooks: "RE: [SI-LIST] : Merits of low dielectric constant"
• In reply to: Haris Japic: "[SI-LIST] : Offset stripline"
• Next in thread: Zabinski, Patrick J.: "RE: [SI-LIST] : Offset stripline"

Because I believe in the derivation of that equation,
h2 and h1 are defined as "near" and "far" planes
respectively. Thus, if you "flip" the construction
around, you'll have to "flip" the variables in the
equation. And everything should come out the same.

- Doug McKean

Haris Japic wrote:
>
> Gentleman,
>
> I have question regarding offset (asymmetric)
> stripline.
>
> ________________________ PLANE
>
> h2
> ------ trace
> H
>
> h1
>
> ________________________ PLANE
>
> Equation for the characteristic impedance, that I
> found and used, is:
>
> Z0~= [80/sqrt(Er)]ln(4.75(h1/w)*(1-h1/4*h2)

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

• Next message: Ingraham, Andrew: "RE: [SI-LIST] : Merits of low dielectric constant"
• Previous message: Doug Brooks: "RE: [SI-LIST] : Merits of low dielectric constant"
• In reply to: Haris Japic: "[SI-LIST] : Offset stripline"
• Next in thread: Zabinski, Patrick J.: "RE: [SI-LIST] : Offset stripline"

This archive was generated by hypermail 2b29 : Wed Nov 22 2000 - 10:50:43 PST