From: selvaraj subramanian ([email protected])
Date: Wed Jun 14 2000 - 21:01:04 PDT
Hello,
I couldn't understand your question. I am working with 622MHz PECL signal
now. The IBIS model is for the component what we are using.
It is fixed for a particular component or device.
If you clarify little bit more, i can able to give some information.
regards,
Selva
----- Original Message -----
From: Javin Olson <[email protected]>
To: <[email protected]>
Sent: Wednesday, June 14, 2000 6:58 PM
Subject: [SI-LIST] : 622 Mhz PECL IBIS
> I am wondering if anyone has used an IBIS model for a 622 Mhz PECL
> signal? This is the common interface for OC12 optics. If anyone has a
> model or knows where I could find one, I would greatly appreciate it.
>
> Also, if anyone has done integrity testing on signals like this, I would
> like some feedback on how well they believe their tools handled it.
>
> Thanks for the help..
>
>
> --
> Javin Olson
> Design Eng. - Plexus Technology Group
> [email protected]
> (920) 969-6171
>
> **** To unsubscribe from si-list or si-list-digest: send e-mail to
> [email protected]. In the BODY of message put: UNSUBSCRIBE
> si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
> ****
>
>
**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****
This archive was generated by hypermail 2b29 : Wed Nov 22 2000 - 10:50:38 PST