From: Muranyi, Arpad (arpad.muranyi@intel.com)
Date: Wed Jun 14 2000 - 08:37:09 PDT
I would suggest to read the articles and papers on the IBIS web site
as a starting point. Those should help you understand these basics.
http://www.eia.org/eig/ibis/ibis.htm
Arpad Muranyi
Intel Corporation
====================================================================
-----Original Message-----
From: Christoph Hillen [mailto:Christoph.Hillen@aachen.utimaco.de]
Sent: Wednesday, June 14, 2000 1:18 AM
To: si-list@silab.eng.sun.com
Subject: [SI-LIST] : How do IBIS models work?
Hello group,
I've got a beginner's basic question regarding IBIS-models...
What do I see if I look at the data in the models, e.g. GND-clamp?
Is this really a measurement which can be reproduced in a lab? If so, how
would
this measurement look like?
How can a simulation software tell me anything about waveforms on a pcb with
this data? In some models there's no risetime, but if I use it in a
simulation
tool, it will lead to a waveform...?
I would appreciate if anyone of you could explain that to me or give a hint
for
a book for a good starting point...
And what is an eye-diagram?
Thanks in advance!
Best regards,
Christoph Hillen
Utimaco Safeware AG
Germany
http://www.utimaco.de
mailto: christoph.hillen@aachen.utimaco.de
**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****
**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****
This archive was generated by hypermail 2b29 : Wed Nov 22 2000 - 10:50:37 PST