[SI-LIST] : Getek vs. CE

From: Sean Murray ([email protected])
Date: Thu May 25 2000 - 11:32:30 PDT

• Next message: Barry Ma: "[SI-LIST] : RE: Split Plane"
• Previous message: Greim, Michael: "RE: [SI-LIST] : Fanning out an LVDS Clock"
• Next in thread: Clewell, Craig W: "RE: [SI-LIST] : Getek vs. CE"
• Maybe reply: Clewell, Craig W: "RE: [SI-LIST] : Getek vs. CE"

All,
        Does anyone have any literature or Data showing the differences
between CE and Getek at different frequencies. I am more interested in
data that pertains to the same application such as a ATE board where the
same design was built using both CE and Getek. There seems to be 2
sides, with one saying Getek outperforms CE at higher speeds and the
other CE is better for higher speed parts. The application in question
will be running at speeds above 400 mhz.

Regards,
Sean Murray
General Manager
 
M&M Specialties Inc.
1236 W. Southern Ave. #106
Tempe, AZ. 85282-4518
Phone: (480) 858-0393 x105
Cell: (602) 684-7859
Fax: (480) 858-1882
Email: [email protected]
WWW.mmspec.com
                  
                  

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

• Next message: Barry Ma: "[SI-LIST] : RE: Split Plane"
• Previous message: Greim, Michael: "RE: [SI-LIST] : Fanning out an LVDS Clock"
• Next in thread: Clewell, Craig W: "RE: [SI-LIST] : Getek vs. CE"
• Maybe reply: Clewell, Craig W: "RE: [SI-LIST] : Getek vs. CE"

This archive was generated by hypermail 2b29 : Wed Nov 22 2000 - 10:50:28 PST