RE: [SI-LIST] : VeriBest / Mentor Tools

About this list Date view Thread view Subject view Author view

From: Doug Brooks ([email protected])
Date: Thu May 11 2000 - 09:15:52 PDT


At 08:57 AM 5/11/00 +0200, you wrote:

>Thanks for the answers so far...

>Doug: I assume that you don't use the tools (although they are quite good)
>because they need IBIS models... so what kind of models do you prefer and what
>tools do you use with them?
>
>Regards,
>Christoph Hillen
>Utimaco Safeware AG
>Germany

Well, I didn't say we don't use them! It's just a pain sometimes to get all
the IBIS models you need. You need them with Hyperlynx, too. But the
tradeoffs there are (a) I think the generic IBIS models are easier to set
up in Hyperlynx, but I don't think the integration with the design tool is
as good.

Doug

.
************************************************************
Doug Brooks' book "Electrical Engineering for the Non-Degreed
Engineer" is now available. See our web site for details.
.
Doug Brooks, President [email protected]
UltraCAD Design, Inc. http://www.ultracad.com

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Wed Nov 22 2000 - 10:50:17 PST