[SI-LIST] : power supply filtering

About this list Date view Thread view Subject view Author view

From: Prasad, Omprakash (o-prasad1@ti.com)
Date: Sat Apr 22 2000 - 07:14:22 PDT


I am using 10u & 1u capacitors for decoupling a 3.3 v powersupply
which is given to a 14 bit codec . These caps are placed at the entry on
the PCB . In addition i am using 0.1 & 0.01 u caps near the power supply
pins of the IC .
Can someone let me know of a better filtering procedure .The IC is used
for mixed signal applications .

Thanks ,
omprakash .
------------------------------------------

MSP , TEXAS INSTRUMENTS.
EMAIL : op@india.ti.com
VOICE : 080-5099449

-------------------------------------------

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Wed Nov 22 2000 - 10:50:04 PST