From: D. C. Sessions (firstname.lastname@example.org)
Date: Mon Apr 17 2000 - 10:14:58 PDT
Ronnen Lovinger wrote:
> HI guys,
> I am looking for IBIS models for SSTL_2 buffers.
> I am looking in to simulations to decide on the required type of
> SSTL_2 buffers (Class I or Class II) for my point to point application.
> Can anyone point out where I can find such models?
> thanks in advance
As usual, That Depends. If you're looking for IBIS models
for specific SSTL-2 devices then you'll have to check with
the vendors. If you mean a generic SSTL-II driver model,
then at present there aren't any published although the
EDA companies may have some for use by their customers.
At present the way that the SSTL-2 spec is written there is
no maximum driver strength, so unterminated SI sims will be
a bit pessimistic. For most point-to-point applications
Class I is adequate, but you're right to be careful.
Note: if anyone DOES have an IBIS driver model for SSTL-II,
the JEDEC committee responsible for SSTL-2 has an action item
to standardize such a beast. You, too, can be a part of
-- D. C. Sessions email@example.com
**** To unsubscribe from si-list or si-list-digest: send e-mail to firstname.lastname@example.org. In the BODY of message put: UNSUBSCRIBE si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu ****
This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:36:12 PDT