Re: [SI-LIST] : Parallel Plate Capacitance for Bypass

About this list Date view Thread view Subject view Author view

From: Chris Padilla (cpad@cisco.com)
Date: Fri Mar 24 2000 - 14:54:08 PST


This sounds very much like two caps in series to me so the value would actually
go down by 1/2 assuming the er and h are the same for both caps. Somehow,
though,
this doesn't *feel* right to me. I think I am missing something here.

----->Chris

>
>
> 2. If you have a power plane sandwiched between 2 ground planes, does the
> parallel plate capacitance double for a given area?
>
> Thank you,
> Chris Hansen
> Sr. Design Engineer
> DPT & Adaptec Companies
>

**** To unsubscribe from si-list or si-list-digest: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:35:54 PDT