[SI-LIST] : Lab procedures for TDR

About this list Date view Thread view Subject view Author view

From: Kevin Dale Kirmse (kirmse@netaxs.com)
Date: Wed Mar 22 2000 - 21:13:23 PST


I am looking for references on procedures for using TDR equipement.
I am taking measurements using a Tek CSA803 + SD-24 and don't trust
some of the results I am getting. It is quite possible I am simply
not interpreting what I am seeing correctly. The 75 ohm single /
150 differential impedance of fibre channel makes life "interesting".

---------------------------------------------------------------------
| Dr. Kevin Dale Kirmse, PhD EE
| Portable System Design, High Speed Serial Links
| FPGA Design, Video Hardware, Graphics Hardware
|
| King of Prussia, PA 19406
| kirmse@netaxs.com
---------------------------------------------------------------------

**** To unsubscribe from si-list or si-list-digest: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:35:51 PDT