Re: [SI-LIST] : printed resistors

About this list Date view Thread view Subject view Author view

From: Istvan Novak - Board Design Technology ([email protected])
Date: Thu Mar 16 2000 - 07:32:18 PST

SI-List,

Anyone out there has experience with printed resistors on the PCB surface (not Ohmega-Ply)? What
is needed: resistors only on the surface of the PCB, resistance value around 0.2 to 2 ohms, size
about 20mils x 20mils, minimal (no) power requirement, +-20% tolerance. Anyone knows manufacturers
for something like this with proven record, and with established design rules?

Regards

Istvan Novak Sun Microsystems, Inc.
[email protected] Workgroup Servers, BDT Group,
                        One Network Drive, Burlington, MA 01803
                        Phone: (781) 442 0340

**** To unsubscribe from si-list or si-list-digest: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:35:40 PDT