Re: [SI-LIST] : A basic question

About this list Date view Thread view Subject view Author view

From: Brian Young ([email protected])
Date: Fri Mar 17 2000 - 06:30:39 PST


Oops. That's

L=Ls+Lg-2*Msg

Brian Young wrote:
>
> The total loop inductance is
>
> L=Ls+Lg-Msg
>
> where
> Ls is the partial self inductance of the signal
> Lg is the partial self inductance of the ground
> Msg is the partial mutual inductance between signal and ground
>
> Moving the signal and plane closer together leaves Ls and Lg the
> same but Msg increases, so L decreases.
>

-- 
***************************************************************
* Brian Young                           phone: (512) 996-6099 *
* Somerset Design Center                  fax: (512) 996-7434 *
* Motorola, Austin, TX               [email protected] *
***************************************************************

**** To unsubscribe from si-list or si-list-digest: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu ****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:35:38 PDT