Re: [SI-LIST] : Bad IBIS models!

About this list Date view Thread view Subject view Author view

From: Scott McMorrow ([email protected])
Date: Wed Mar 15 2000 - 14:03:22 PST


My major pet peeves:

Packages that are dead wrong.
... and most are.

Double counting die capacitance in with package
capacitance.

Ramps and Waveform tables created at high load resistance.

Min and Max waveform tables created at nominal voltage.

IV curves which don't pass through the origin.

Extracted parameters at typical corner only.

Loading that does not match the data sheet parameters.

... etc ... etc....

--
Scott McMorrow
Principal Engineer
SiQual, Signal Quality Engineering
18735 SW Boones Ferry Road
Tualatin, OR  97062-3090
(503) 885-1231
http://www.siqual.com

**** To unsubscribe from si-list or si-list-digest: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu ****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:35:38 PDT