[SI-LIST] : trace width for clock routing- wider/narrower?

About this list Date view Thread view Subject view Author view

From: 林朝煌 ([email protected])
Date: Sun Mar 12 2000 - 17:04:50 PST


Dear All SI experts,

For clock routing, does wider trace width have more advantage than narrower
one ,in term of better electrical properties, under the condition of same
trace to space ratio and good match in impedance with source terminators?

For example, 5 mils trace width with 10 mils trace spacing versus 10mils
trace width with 20 mils trace spacing.

Thank you for your helps in advance.

John Lin
SI Engineer
Quanta Computer Inc.,Taiwan, R.O.C.
Email: [email protected]
Tel: 886+3+3979000 ext. 5183

**** To unsubscribe from si-list or si-list-digest: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:35:32 PDT