RE: [SI-LIST] : ribbon cable models

About this list Date view Thread view Subject view Author view

From: DAmbrosia, John F ([email protected])
Date: Fri Mar 10 2000 - 10:52:14 PST


Everyone,
For those interested in AMP's available models, please visit
www.amp.com/simulation <http://www.amp.com/simulation>

Have a nice day!

John D'Ambrosia
AMP Circuits & Design
Program Manager, Strategic Accounts
Tel (717) 986-5692
Fax (717) 986-5095
Email: [email protected] <mailto:[email protected]>
URL: http://www.amp.com/simulation <http://www.amp.com/simulation>

        -----Original Message-----
        From: Kai Keskinen [SMTP:[email protected]]
        Sent: Friday, March 10, 2000 1:34 PM
        To: '[email protected]'
        Subject: RE: [SI-LIST] : ribbon cable models

        Jonathan:

        A ribbon cable is pretty easy to generate your own model for using
a field solver such as the one that comes with HSPICE. Other 2-d field
solvers should be as easy to use for this situation. All you need to know is
your geometry and the dielectric constant of the insulation and how to use
the field solver.

        Simple single line to complicated multi-line onnector models are
available for most of the TYCO (formerly AMP) connector family. All you have
to do is phone or e-mail your local rep. Other connector vendors usually
also have models available but sometimes it is more painful to obtain them
and/or use them.

        Cheers,

        Kai Keskinen
        Equipment and Network Interconnect
        Nortel Subsystems and Performance Networks (NSPaN)
        (613)-765-3506 (ESN 395)
        [email protected] <mailto:[email protected]>

        -----Original Message-----
        From: Fasig, Jonathan L. [SMTP:[email protected]]
        Sent: Friday, March 10, 2000 8:50 AM
        To: [email protected]
        Subject: RE: [SI-LIST] : ribbon cable models

        Dennis: You might try George Hare at 3M in Austin, Texas or Zane
Daggett at
        Hitachi Cable in Manchester, NH.

        Regards
        jf

        -----Original Message-----
        From: Rehm, Dennis [ mailto:[email protected]
<mailto:[email protected]> ]
        Sent: Thursday, March 09, 2000 4:07 PM
        To: '[email protected]'
        Subject: [SI-LIST] : ribbon cable models

        Does anyone know where I can get ribbon cable models for the cheap
ribbon
        cables that are used for ATA interconnect? these can be single ended
models
        but I would want crosstalk terms. I would also need connector models
if
        available anywhere

        Thanks

        Dennis

        **** To unsubscribe from si-list or si-list-digest: send e-mail to
        [email protected]. In the BODY of message put: UNSUBSCRIBE
si-list
        or UNSUBSCRIBE si-list-digest, for more help, put HELP.
        si-list archives are accessible at http://www.qsl.net/wb6tpu
<http://www.qsl.net/wb6tpu>
        ****

        **** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE si-list
or UNSUBSCRIBE si-list-digest, for more help, put HELP.

        si-list archives are accessible at http://www.qsl.net/wb6tpu
<http://www.qsl.net/wb6tpu>
        ****
        
        

**** To unsubscribe from si-list or si-list-digest: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:35:32 PDT