RE: [SI-LIST] : ribbon cable models

About this list Date view Thread view Subject view Author view

From: Fasig, Jonathan L. ([email protected])
Date: Fri Mar 10 2000 - 05:50:24 PST


Dennis: You might try George Hare at 3M in Austin, Texas or Zane Daggett at
Hitachi Cable in Manchester, NH.

Regards
jf

-----Original Message-----
From: Rehm, Dennis [mailto:[email protected]]
Sent: Thursday, March 09, 2000 4:07 PM
To: '[email protected]'
Subject: [SI-LIST] : ribbon cable models

Does anyone know where I can get ribbon cable models for the cheap ribbon
cables that are used for ATA interconnect? these can be single ended models
but I would want crosstalk terms. I would also need connector models if
available anywhere

Thanks

Dennis

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE si-list
or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

**** To unsubscribe from si-list or si-list-digest: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:35:31 PDT