[SI-LIST] : HSPICE: Delay and invert a differential signal w.r.t to another.

About this list Date view Thread view Subject view Author view

From: Vipul Badoni (vipul@lsil.com)
Date: Thu Mar 02 2000 - 00:02:57 PST


Hello,

I would like to delay and invert a differential signal w.r.t to
another in HSPICE. I have attached the spice code I tried to get this
to work but the sim seems to hang when I run it. With the lines
starting with "Etin1" and "Etnin1" commented out or the nodes "in1"
and "nin1" held static I do not seem to have the problem.

Thanks in advance for your suggestions/help.

Vipul.

.param baud=400ps
***** Start 'channel' input data stream **********
Xchannel in0 nin0 channel LO='supply-0.875' HI=supply tr=0.1ns

Etin1 nin1 0 DELAY in0 0 baud
Etnin1 in1 0 DELAY nin0 0 baud

*Vin1 in1 0 dc=supply
*Vnin1 nin1 0 dc=0

****************************************************

.SUBCKT channel p n
En n 0 PWL(1) p 0 LO HI HI LO
Vp p 0 PWL 0 '(LO+HI)/2'
+ '2*baud' LO '2*baud+tr' HI

*Repeats.

.ENDS channel

**** To unsubscribe from si-list or si-list-digest: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:35:16 PDT