RE: [SI-LIST] : Power / Ground simulation

About this list Date view Thread view Subject view Author view

From: 林朝煌 (John@quantatw.com)
Date: Sun Feb 20 2000 - 18:50:47 PST


Dear Andrew,

I am looking for the way of simulation of power/ground noise crossing a
board.

Thanks.

John Lin
SI Engineer
Quanta Computer Inc.,Taiwan, R.O.C.
Email: John@quantatw.com
Tel: 886+3+3979000 ext. 5183

-----Original Message-----
From: Ingraham, Andrew [mailto:Andrew.Ingraham@compaq.com]
Sent: Friday, February 18, 2000 11:49 PM
To: 'si-list@silab.eng.sun.com'
Subject: RE: [SI-LIST] : Power / Ground simulation

> How to simulate power/ground noise?
 
Are you looking at power/ground noise of an IC package, or noise within the
chip die, or noise across a board?

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list
or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

**** To unsubscribe from si-list or si-list-digest: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:35:07 PDT