[SI-LIST] : Power / Ground simulation

About this list Date view Thread view Subject view Author view

From: 林朝煌 (John@quantatw.com)
Date: Thu Feb 17 2000 - 21:16:26 PST


Dear All SI gurus,

How to simulate power/ground noise? Are any EDA tools out there to estimate
the effect of bus transient contributing to the power/ground noise?
What are the difficulties on simulating power/ground?

Your commands are appreciated.

Best Regards,

John Lin
SI Engineer
Quanta Computer Inc.,Taiwan, R.O.C.
Email: John@quantatw.com
Tel: 886+3+3979000 ext. 5183

**** To unsubscribe from si-list or si-list-digest: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:35:06 PDT