RE: [SI-LIST] : High Density Board to Board Connectors?

About this list Date view Thread view Subject view Author view

From: Clewell, Craig W ([email protected])
Date: Mon Feb 14 2000 - 07:20:09 PST


Yes...you should check out the FCI (Framatome Connectors) Micropax, HB
Metral, or their BGA, depending on size, application you are using

-----Original Message-----
From: Doug Piper [mailto:[email protected]]
Sent: Monday, February 14, 2000 9:54 AM
To: 'reflector, SCSI, post messages'; 'Reflector, SFF, post messages';
'Reflector, SI List, Post Message'
Subject: [SI-LIST] : High Density Board to Board Connectors?

I'm looking for a high-density board to board connector. It must have 72
pins and prefer a ground-plane integral to the connector. We're considering;
AMP's Mictor 767007-9 and the SAMTEC 0.8mm QTE-020-03-F-D. Can anyone
recommend any other high-density connectors?

Doug Piper
Woven Electronics
P.O. Box 189
Mauldin, SC 29662
E-mail: [email protected]
Pager: [email protected]
PH 864-967-1751
FAX: 413-812-5761
web: www.wovenelectronics.com

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE si-list
or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

**** To unsubscribe from si-list or si-list-digest: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:35:03 PDT