[SI-LIST] : 3D data interchange

About this list Date view Thread view Subject view Author view

From: Witte, Markus (Markus.Witte@HARTING.com)
Date: Fri Feb 11 2000 - 07:17:13 PST


Dear SI-LIST users,

Who has worked with the data interchange of a CAD system into another ever
appreciates it, if the exported geometry appears in the aim system in
desired form.

* What is in your mind the best setup in a CAD system such as IDEAS to
export a complex geometry as SOLID and NOT as SURFACES?
* What is your experience with ACIS-healers.
* Who found the best setup for the IGES interface in IDEAS to do this?

Regards,

> Markus Witte
>
> HARTING KGaA
> Dept.: Printed Board Connector Division PBC PD2
> E-Mail: markus.witte@HARTING.com
> http://www.HARTING.com
> Phone: +49 57 72 47-4 67
> Fax.: +49 57 72 47-4 71

**** To unsubscribe from si-list or si-list-digest: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:35:03 PDT