From: Ron Miller ([email protected])
Date: Fri Feb 04 2000 - 13:18:38 PST
> MDS FROM HP works well but the learning curve is long. ADS also from
HP does not yet have the power/ground models ported.
Ron Miller
> We're looking for a tool which will enable us to analyze power plane noise,
> ground bounce, and bypass capacitor placement of pc board nets, ASIC
> packages, etc. If possible, please share your experiences with tools you
> have used to perform this analysis. A tool which has a short learning curve
> is highly preferred.
> Thanks and regards,
> Fabrizio Zanella
> Hardware Engineering
> EMC Corporation
> 508-435-2075, x14645
> FAX: 508-497-8027
> [email protected]
>
> **** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
> ****
-- Ronald B. Miller _\\|//_ Signal Integrity Engineer (408)487-8017 (' 0-0 ') fax(408)487-8017 ==========0000-(_)0000=========== Brocade Communications Systems, 1901 Guadalupe Parkway, San Jose, CA 95131 [email protected], [email protected]**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu ****
This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:34:59 PDT