Re: [SI-LIST] : Coplanar Transmission Line

About this list Date view Thread view Subject view Author view

From: Roy Leventhal ([email protected])
Date: Fri Feb 04 2000 - 06:03:06 PST


John,

I'm looking at the 500 MHz to 1500 MHz clock rate range. I'm assuming edge rates
in the 100 ps range.

Best Regards,

Roy

John Howard <[email protected]> on 02/03/2000 10:52:42 AM

Please respond to [email protected]

Sent by: John Howard <[email protected]>

To: [email protected]
cc: (Roy Leventhal/MW/US/3Com)
Subject: Re: [SI-LIST] : Coplanar Transmission Line

Hi Roy,
     I've done all three. What frequency range are you thinking of?
John

Roy Leventhal wrote:

> Dear SI Experts,
>
> Who out there has worked with coplanar (waveguide-like) transmission lines as
> opposed to stripline/microstripline?
>
> What can you tell me about it other than what I can find in Collins or Bahl &
> Bhartia?
>
> Thanks in advance,
>
> Roy
>
> **** To unsubscribe from si-list: send e-mail to [email protected].
In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
> ****

**** To unsubscribe from si-list: send e-mail to [email protected]. In
the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:34:57 PDT