RE: [SI-LIST] : si-list FAQ

About this list Date view Thread view Subject view Author view

From: Weston Beal ([email protected])
Date: Wed Feb 02 2000 - 15:30:07 PST


Ray,

I must have learned a lot from you (or you from me), because I was thinking
this very thought today. I would be happy to edit a section on SI
simulation tools. I've used quite a few over the past few years. I think
that the most common question I see on this list is, "what tool should I use
for simulation?" I hope that my affiliation with Mentor Graphics will not
bias our subscribers against my editing.

Regards,
Weston

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of Ray Anderson
Sent: Wednesday, February 02, 2000 1:26 PM
To: [email protected]
Subject: [SI-LIST] : si-list FAQ

While cruising around the floor at Designcon 2000 in
Santa Clara yesterday I had the opportunity to meet and
speak with a number of si-list subscribers.

One topic that kept surfacing was the need for a FAQ
(Frequently Asked Questions) document regarding SI topics.

...

-Ray Anderson
Sun Microsystems
defined, and

**** To unsubscribe from si-list: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:34:53 PDT