[SI-LIST] : Re: Field Extractor + Simulator

About this list Date view Thread view Subject view Author view

From: Christian S. Rode ([email protected])
Date: Tue Jan 25 2000 - 16:14:42 PST


I plead having only had 4 hours of sleep in the preceding 24...
Here is the missing URL:

http://www.circuitsim.com/FieldExtractor

Apologies,
Chris Rode

"Christian S. Rode" wrote:
>
> Hello all,
>
> Are we cool yet?
>
> The field extractor interface now creates a form with the
> Ls and Cs it extracts (for the 2-line case), which allows
> you to perform some basic TL simulations. The model is
> super simple - two voltage sources with finite impedance
> driving (or not) each of two lines with termination to
> the midpoint voltage. You can drive from either end of
> the line and the other end becomes the terminated end.
> If you want to not terminate just use a large value for
> the terminating resistor, such as 1e9.
>
> It's very prototype-ish and I'm sure there'll be new
> bugs (please don't hesitate to drop a bug report on
> me), but I hope it's of interest.
>
> As usual, bugs, complaints, praise, etc. to
> mailto:[email protected]
>
> Regards,
> Chris Rode

**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:34:49 PDT